iMars J03 - Getting Started; Charging the Jump Starter

Pad
wireless charging option.
4
USB C Input Port
Charge the jump starter (via USB-A to USB-C cable).
5
USB Output Port
(QC 3.0)
Charge your devices (QC 3.0 compatible) faster, with 75%
increase in speed.
6
Jump Starting Port
Insert the plug into the jump starting port.
7
LED Flashlight
Flashlight modes: Solid, SOS, Alert, and Off
8
Black Clamp
Connect the black clamp to the negative terminal of the car
battery.
9
Red Clamp
Connect the red clamp to the positive terminal of the car
battery.
10
Plug
Insert the plug into the jump starting port.
11
Battery Clamp
Indicator Lights
Show the status of the smart battery clamp.
12
Force Start Button
You need to press this button if the car battery voltage too
low.
Getting Started
Charging the jump starter:
1. Connect the jump starter and the power source via the USB C cable.
2. Short press the ON/OFF button to turn on the product. While charging
the jump starter, the LED Display Screen will show the percent power
increased. Once it is fully charged, the LED Display Screen will show