Cautions
1. Use the original smart battery clamp to start the car.
2. Do not use this unit if any cable clamp or cord is damaged.
3. Do not connect two clamps together when the product is turned on.
Do not connect both cable clamps to the same piece of metal. Otherwise,
the jump starter will be damaged.
Care and Maintenance
1. DO NOT use the product to start a bulging car battery.
2. Store the product in a shaded, well-ventilated area.
3. Please handle the product with care and do not abuse it. Avoid
dropping or striking the product heavily and repeatedly.
4. DO NOT disassemble or modify the product.
5. DO NOT use detergents to clean the product.
6. DO NOT place the products in a high-temperature environment for
long. The operating temperature of this product is -20-60℃. The storage
temperature of the product should not exceed 50℃/122℉.
7. Check the battery level of the product at least once every three
months and charge the product in time.
8. Keep the product away from children and pets.
To Next Page
Loading...