▪ If you failed to start your car, you need to disconnect the battery clamp
from the vehicle and the jump starter. Wait for at least 30 seconds, then
try again.
▪ If you failed to start your car after 3 attempts, you can use the force
start function. See step 3-b.
Step 3-b (optional): Force start function. First please make sure that the
clamps are connected to the correct polarity battery terminal. Then,
hold the force start button for 3 seconds to start your car. When the
indicator light of the smart clamp is solid green, you need to start the
vehicle within 30s.
Step 4: Once your car is started, remove the battery clamp from the car
battery and the jump starter within 30 seconds.
To Next Page
Loading...