Need help?Do you have a question about the ImaxRC x100 and is the answer not in the manual?
Describes the charger's ability to operate on AC and DC power sources.
Highlights the convenience of the touch screen interface for user operation.
Details the screen specifications, including resolution and color depth.
Introduces the proprietary operating system for efficient charging management.
Notes the USB port for charging external devices and connectivity.
Mentions the high-precision ARM processor for smooth performance.
Indicates customization options for different interface languages.
Explains access to Type, Mode, Cells, Current, Load, Save, Uset, Start.
Lists supported battery chemistries like LiPo, LiFe, NiMH, NiCd, Pb with their specs.
Details available modes like Balance, Charge, FastCharge, Storage, Discharge.
Covers Checker, Manual Charge, and Cycle functions for specific battery types.
Instructions for connecting power cord and battery, including balance ports.
Details the startup sequence, warning screens, and user agreement acceptance.
Guide to charging a LiPo battery, covering type, mode, cells, and current settings.
Guide to charging a NiMH battery, covering type, mode, cells, and current settings.
Guide to charging a Pb battery, covering type, mode, cells, and current settings.
Setting cut-off voltage, temperature, capacity, and time for safety.
Adjusting Lixx Check Time, Nixx Delta Peak, Waste Time, and Cycle Time.
Configuring Backlight Level, Buzzer, Language, and navigation.
Instructions for safe usage locations, avoiding dust, smoke, and moisture.
Information on do-not-maintain-yourself policy and warranty limitations.
General| Input Voltage | 11-18V DC |
|---|---|
| Charge Current | 0.1-10.0A |
| Charge Power | 100W |
| Discharge Power | 10W |
| Balance Current | 300mA/cell |
| LiPo/LiIon/LiFe Cell Count | 1-6S |
| NiCd/NiMH Cell Count | 1-15 cells |
| PB Voltage | 2-20V |
| Discharge Current | 0.1-5.0A |
| Battery Type | Li-Po/Li-Fe/Li-Ion/NiCd/NiMH/PB |
To Next Page
