Need help?Do you have a question about the ImaxRC B6 AC and is the answer not in the manual?
General introduction to the B6 AC compact charger and its automatic features.
Lists technical details like input/output, charge rates, and supported battery types.
Identifies and describes the charger's input/output ports, balance ports, and controls.
Step-by-step guide to connect the charger to power and the battery, ensuring correct polarity.
Explains charge rate determination, power limits, and the two-hour safety timer.
Steps to start charging, select battery type, and interpret status LED indications.
Procedures for stopping charge, unplugging, and indicators of a completed charge.
Troubleshooting LiPo status LED errors related to the balance connector.
Diagnosing issues with cell condition, input voltage, or battery connection.
Resolving errors from incorrect battery type selection or high charger temperature.
Lists the cables and accessories provided with the charger.
Guidelines for requesting warranty service, including required information and packing instructions.
Information on how to query security codes via the company website.
Provides the address, telephone, fax, and website for iMaxRC CO.,LTD.
General| Charge Current | 0.1-5.0A |
|---|---|
| Discharge Current | 0.1-1.0A |
| Max Charge Power | 50W |
| Max Discharge Power | 5W |
| NiCd/NiMH battery cell count | 1-15 cells |
| Li-ion/Polymer cell count | 1-6 cells |
| Pb battery voltage | 2-20V |
| Input Voltage | 100-240V AC |
| Battery Types Supported | LiPo, Li-ion, LiFe, NiCd, NiMH, Pb |
| Current drain for balancing Li-po | 300mA |
To Next Page
