ImaxRC B6 10 pro - User Manual

Microprocessor controlled high-performance rapid charger/discharger with integrated
balancer USB PC link and temperature sensor
Charge current up to 10A,discharge current up to 5A,1 to 6 series of Lilo/LiFe,1 to 18
cells of NiCd/NiMH,2 to 24V of Lead-acid(Pb)
Instruction Manual
www.imaxrc.com
All specifications and figures are subject to change without
notice. Printed in China ©2010
10
10
Professional Balance Charger
b6
b6
10
10
b6
b6

Summary

Critical Safety Information

General Safety Precautions

Covers precautions for unsupervised charging, environmental conditions, power sources, and setup surfaces.

Battery Compatibility and Handling

Details voltage/current specs for various battery types, prohibited batteries, and safe connection practices.

Charging and Discharge Best Practices

Outlines essential checks before charging and guidelines for proper charging and discharging procedures.

Program Flow Charts

User Parameter Configuration

Initial Setup and Battery Identification

Guides through initial setup, identifying Lithium battery cell counts for correct operation.

Performance and Safety Settings

Covers settings for NiMH/NiCd sensitivity, temperature cut-off, timers, and input power limits.

Lithium Battery Programs

NiMH;NiCd Battery Programs

Pb (Lead-Acid) Battery Program

Data Management Programs

Data Loading Program

Warning and Error Messages

Balancing Multi Lithium Battery Packs

Maximum Circuit Power Chart

ImaxRC B6 10 pro Specifications

Power

operating voltage range	10.0-18.0 Volt
circuit power (charging)	max. 200 Watts
circuit power (discharging)	max. 25 Watts
charge current range	0.1-10.0A
discharge current range	0.1-5.0A
Pb battery voltage	2 to 24V

Battery

current drain for balancing Lipo	200mAh/cell
NiCd/NiMH battery cell count	1-18 cells
lithium battery cell count	1-6 Series

Weight and Dimensions

weight	480 g
dimensions	143×119×42 mm