Need help?Do you have a question about the IME IF2E011 and is the answer not in the manual?
General| Brand | IME |
|---|---|
| Model | IF2E011 |
| Category | Recording Equipment |
| Language | English |
Explains the 'Bridge' mode, also called 'Cable wired', for message transmission without variation.
Details the functions of device control buttons (Save/Default/Reboot) and data export.
Details Ethernet interface settings like IP, Subnet, Gateway, and Mode.
Covers Serial Port settings including Speed and Parity.
Explains Serial-TCP settings such as Mode, TCP Port, and timeouts.
Explains the Ethernet parameters: IP, SubnetMask, Gateway, and Mode.
Describes Serial Port parameters: Speed and Parity.
Explains Serial TCP parameters: Mode, Modbus TCP filter, TCP Port, and TCP Timeout.
Introduces the 'Discover 1.2' program for finding interfaces on the network.
Explains the functions of Search, Reboot, and Restore buttons within the discovery program.
Lists the different models of the interface (IF2E011 and IF2E111) with their specifications.
Explains the purpose of each terminal connection on the device (Power, Ethernet, RS485).
Recommends Cat 5 cable for Ethernet and specifies 'Cross' vs 'Straight' cables.
To Next Page
