To Next Page
R
Robert WiseJul 30, 2025
What to do if the IMER Sewing Machine start button is pressed but the motor does not start?
- CCarolyn TateJul 30, 2025
If the IMER Sewing Machine's motor doesn't start when you press the start button, the possible causes are: - There's no voltage on the power line. Check the power line. - The socket and plug aren't fitted correctly. Fit them correctly. - The RCCB switch isn't activated. Activate the RCCB ON button. - The power cable from the plug to the panel is disconnected. Replace the cable. - An electric wire is loose inside the motor terminal board or inside the panel. Arrange for repairs by an electrician. - The start switch is faulty. Change the switch.
General