To Next Page
K
Kristen MyersAug 9, 2025
What to do if my IMER ET 300 Lifting Systems machine does not lift or lower?
- RryanandersonAug 9, 2025
If your IMER Lifting Systems machine isn't responding to lift or lower commands, several factors could be at play. First, verify that the emergency stop button is not engaged; if it is, turn it to disengage. Next, ensure the machine is receiving power by checking the mains cable and confirming that it's properly plugged in. Finally, inspect the power board cutout and reset the switch if it has tripped.
General
