IMER TR 225 User Manual

17 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

R02 - 2004/01

- Cod. 3213961 -

ELEVATORE

HOIST

(1140623 - 110 V / 50 Hz - 30 m)

manuale uso manutenzione ricambi

Operating,maintenance, spare parts manual

IMER INTERNATIONAL S.p.A.

53036 POGGIBONSI (SIENA) - Loc. SALCETO

(ITALY)

Tel. +39.0577.973.41 - Fax +39.0577.983.304

Table of Contents

Questions and Answers:

J
Jesse RogersAug 4, 2025
What to do if my IMER TR 225 Lifting Systems machine does not lift or lower on command?
- E
  Erika Baker DVMAug 4, 2025
  If your IMER Lifting Systems machine isn't responding to lift or lower commands, consider these potential causes and solutions: * **Emergency stop button engaged:** Turn the button to disengage it. * **No power to machine:** Check the mains cable. * **Plug not inserted:** Ensure the plug is properly inserted. * **Power board cutout tripped:** Reset the overload trip. * **Thermal overload switch tripped:** Reset it by pushing the button.
K
Katherine JacksonAug 13, 2025
Why does the thermal cutout trip frequently on my IMER Lifting Systems?
- D
  Daniel ThompsonAug 13, 2025
  Frequent thermal cutout trips on your IMER Lifting Systems could be due to low mains voltage. Check the parameters to ensure they are within the recommended range.

IMER TR 225 Specifications

General

Brand	IMER
Model	TR 225
Category	Lifting Systems
Language	English

Summary

General Description and Installation

Product Overview

Details the hoist's design, intended use, and components.

Installing the Hoist on Site

Provides instructions for correctly installing the hoist at the work site.

Operational Testing Procedures

No-Load and Load Testing

Outlines the necessary no-load and load tests before operating the hoist.

Safety Warnings and Precautions

General Safety and Operation

Lists critical safety warnings and operating guidelines for user protection.

Wire Rope Procedures

Rope Replacement and Inspection

Instructions for replacing, inspecting, and performing periodic checks on the wire rope.

Maintenance and Checks

Motor Brake Adjustment

Guidance on adjusting the motor brake for optimal performance and safety.

Gearmotor Lubrication

Procedures for checking and maintaining the gearmotor oil level and changes.

Electrical System Checks

Instructions for inspecting the electrical system and pendant control.

Related product manuals

Preview: IMER TR 225 2V

Preview: IMER TR 225 N

Preview: IMER ET 300