Imesa LM32 - Scrapping; Warranty Conditions

E190601X rev.6_ENG May 30, 2022
37
After turning on the machine, before starting the cycle, it is necessary to always check the perfect functioning of
the safety devices, The user must always scrupulously carry out the following steps:
Sequence of ACTIONS
CONSEQUENT REACTIONS
Start a loop and press STOP ...
... the machine must be stopped and waiting for a new
start.
Start the cycle and check that the porthole is
blocked. Use the fast forward to go to the end of the
program and ...
... check that the porthole cannot be opened until after
the end of the program: with the basket completely
stationary.
Operate the emergency fungus (where present) ...
... the basket must be stopped, and the machine must
be turned off.
ATTENTION!
After turning on the machine and before starting work, it is always necessary to check the perfect functioning of
all safety devices.
38. SCRAPPING
When the life cycle of the machine is concluded, proceed with the scrapping according to current regulations,
separating the metal parts from the plastic parts, from the glass parts, from the electrical / electronic parts.
The crossed-out bin symbol on the equipment or its packaging indicates that the product at the end of its useful
life must be collected separately from other waste.
The separate collection of this equipment, which has reached the end of its life, is organized and managed by
the manufacturer. The user who wants to get rid of this equipment must then contact the manufacturer and
follow the system that this has adopted to allow the separate collection of the equipment that has reached the
end of its life.
Appropriate separate collection for the subsequent start-up of disused equipment for recycling, treatment and
environmentally compatible disposal helps to avoid possible negative effects on the environment and health and
promotes the reuse and/or recycling of the materials of which the equipment is composed.
The abusive disposal of the product by the holder entails the application of the penalties provided for by current
legislation.
ATTENTION!
If the machine is put into disuse, before disposal, disassemble the porthole, so that no one can close themselves
inside at the risk of their lives.
39. WARRANTY CONDITIONS
For warranty conditions, please refer to the manufacturer's price list.
ATTENTION!
To take advantage of the manufacturer’s warranty, the requirements contained in the manual itself must be
scrupulously observed and in particular
- always operate within the limits of use of the machine.