M880 ERROR CODES V.00 – ENGLISH
M880 CODICI DI ERRORE EN V.00 DP184 3
INTRODUCTION
This document provides descriptions of the errors displayed by the receivers and transmitters of
the M880 series through the corresponding LEDs.
Conventions
Bold font means texts that have to be read with particular attention.
Danger: this symbol indicates a topic of particular importance to avoid situations of danger or
damage to things or people.
Attention: this symbol indicates topics that have to be followed scrupulously to ensure correct
operation of the device.
Notes: The notes indicated by this symbol contain tips to keep in mind during the use of the
remote control
General warnings
The use of the radio control is allowed to trained and informed operators, who are fully aware of
the operation of the remote control and the machinery connected to it. It is therefore advisable to
properly train all operators using the equipment.
It is forbidden to turn on the transmitting unit in places that do not allow complete visibility of the
machine operated by the remote control. By activating the transmitting unit in a closed place, or in
any case far from the receiver, it is not possible to have a real awareness of the manoeuvres that
are being carried out, thus causing a dangerous situation.
If work is suspended, even briefly, the control unit must be turned off and the battery removed from
the transmitter, in order to avoid its use by unauthorized persons.
To Next Page
Loading...
