IMET M880 - Page 6

M880 ERROR CODES V.00 – ENGLISH
M880 CODICI DI ERRORE EN V.00 DP184 6
RX HEX
Code
TX ZIP
Code
Description and Information
0x0213 553
0x0214 554
0x0215 555
0x0216 556
0x0217 561
Wait for the software recovery procedure (AMD). Approximately 5
minutes.
0x0218 562 Receiver logic board error. Contact the service center.
0x0219 563
Exceeded the temperature limits of use.
0x021A 564
0x021C 566
Power supply error. Check the power supply voltages of the receiver
unit or contact the service center.
0x021D 611
0x021E 612
0x021F 613
0x0220 614
0x0221 615
0x0222 616
Wait for the software recovery procedure (AMD). Approximately 5
minutes.
0x0223 621
Error in the EEPROM contact the service center to replace the
EEPROM.
0x0224 622 Receiver logic board error. Contact the service center.
0x0225 623
Error in the EEPROM contact the service center to replace the
EEPROM.
0x0226 624
0x0227 625
Absence of EEPROM. Check the correct installation of the
EEPROM.
0x0229 631 Receiver logic board error. Contact the service center.
0x022A 632
Wait for the software recovery procedure (AMD). Approximately 5
minutes.
0x022B 633
0x022C 634
Software inconsistency between transmitter and receiver unit. Re-
program or contact the service center.
0x022D 635
Wait for the software recovery procedure (AMD). Approximately 5
minutes.
0x022E 636
Software inconsistency between transmitter and receiver unit. Re-
program or contact the service center..
0x022F 641
Error in the EEPROM contact the service center to replace the
EEPROM.
0x0230 642
Pairing error between receiver unit and transmitter unit.
0x0231 643
0x0232 644
0x0233 645
0x0234 646
0x0235 651
The dip-switch setting procedure has been performed. Restart the
receiver.
0x0236 652
0x0237 653
Power supply error. Check the power supply voltages of the receiver
unit or contact the service center.
0x0238 654
0x0239 656
Receiver logic board error. Contact the service center. 0x023A 661
0x023B 662
0x023C 663 Pairing error between receiver unit and transmitter unit.