Why does my Imetec Steam Cleaner vacuum cleaner not suction well?
There are several reasons why your Imetec Steam Cleaner might not be suctioning well: * The dust collection system could be full. If this is the case, empty the dust compartment. * The filter might be clogged. Try cleaning or replacing the filter. * The filter might not be fastened properly. Ensure that the filter is installed correctly.
What to do if Imetec Steam Cleaner turns off during use and does not turn on again?
If your Imetec Steam Cleaner turns off during use and won't turn back on, it may be due to a passageway obstruction or a clogged dust collection system. Press the ON/OFF button to turn the appliance off and allow it to cool down for a few hours. Before restarting, remove any dust or objects that may be causing a blockage.
How to fix Imetec Steam Cleaner if it does not turn on?
If your Imetec Steam Cleaner isn't turning on, first, make sure that the plug is securely connected to the socket. Then, check that you've pressed the ON/OFF button.
What to do if the dust collection system is not installed correctly on the Imetec Steam Cleaner?
If the dust collection system isn't installed correctly on your Imetec Steam Cleaner, ensure that the filtering system is correctly inserted inside the dust compartment.
General| Brand | Imetec |
|---|---|
| Model | Piuma |
| Category | Steam Cleaner |
| Language | English |
To Next Page
