6
Indicator Light
The indicator light indicates what’s happening inside the device.
• Steady blue on: Connected to the network, device status is normal.
• Flashing blue: Network error.
• Flashing orange rapidly: Waiting for connection.
• Flashing orange slowly: System upgrade in progress.
Xiaomi Home Connection
This product works with the Mi Home/Xiaomi Home app.
Scan the QR code to download and install the app. You will be
directed to the connection setup page if the app is installed
already. Or search for "Mi Home/Xiaomi Home" in the app store to
download and install it. Open the Mi Home/Xiaomi Home app, tap
"+" on the upper right, and then follow the instructions to add
your device.
Note: The app is referred to as Xiaomi Home app in Europe (except for Russia). The
name of the app displayed on your device should be taken as the default.
Note: The version of the app might have been updated, please follow the instructions
based on the current app version. Make sure the camera turns on and the network
connection is stable during connecting. The indicator is blinking orange rapidly when
waiting for a connection and turns into blue once the camera is successfully connected.
Restoring Factory Settings
In case of changing the network that the camera is connected to or the Xiaomi Account
in the Mi Home/Xiaomi Home app that the camera is paired with, press and hold the
reset button for about three seconds until the indicator blinks orange rapidly, so that
the camera is restored to factory settings, and then reconnect the camera with the app.
Note: Restoring factory settings will not delete the content on the microSD card.
Real-Time Surveillance
In the camera's plugin of the Mi Home/Xiaomi Home app, you can view the real-time
monitoring screen, adjust the sharpness of the image, change the horizontal and vertical
angle of the camera, capture and record the screen, and make remote calls.
To Next Page
Loading...
