To Next PageTo Next Page
Need help?Do you have a question about the Immergas AUDAX TOP 12 ErP and is the answer not in the manual?
General| Type | Air-to-water heat pump |
|---|---|
| Refrigerant | R32 |
| Energy Class Heating | A++ |
| Energy Class DHW | A+ |
| Heating Capacity | 12 kW |
| Max. Water Temperature | 60°C |
| Power Supply | 230V, 50Hz |
Detailed description of the AUDAX TOP ErP heat pump range and its capabilities.
Key features and specifications for mono-phase and three-phase AUDAX TOP ErP models.
Physical dimensions and connection points for AUDAX TOP ErP models.
Required clearances for proper installation of AUDAX TOP ErP units.
Operational boundaries and frost protection features for AUDAX TOP ErP.
Detailed technical specifications for AUDAX TOP 6 ErP, covering heating and cooling circuits.
Diagrams and key components of the hydraulic circuits for various AUDAX TOP ErP models.
Graphs and configuration options for the AUDAX TOP ErP circulation pump.
Introduction to integrated heating systems with AUDAX TOP ErP and other components.
Features and operation of the AUDAX TOP ErP control panel for system settings.
Capabilities and technical features of the Immergas System Manager for integrated systems.
Printed Circuit Board (P.C.B.) layouts for AUDAX TOP ErP models.
Electrical connection details for terminal blocks on AUDAX TOP ErP units.
Description of accessories for zone management, including remote controls and sensors.
Details on kits for managing mixed zones and direct zones in heating/cooling systems.
Technical features and dimensions for various capacities of inertial storage tanks.
