Immergas MAGIS COMBO 4 V2 - Page 5

5
GENERAL RECOMMENDATIONS
is book contains important information for the:
Installer (sect ion 1);
User (sect ion 2);
Maintenance Technician (section 3).
• e user must carefully read the instructions in the specic section (section 2).
• e user must limit operations on the appliance only to those explicitly allowed in the specic section.
• Every operation carried out on the heat pump (e.g. set up, inspection, installation and commissioning), must mandatorily be
performed by authorised personnel alone and in possession of a technical engineering or professional degree qualifying them to
perform these tasks. ey must also have attended a refresher course acknowledged by competent authorities. is particularly
applies to personal specialised in C.H. and air-conditioning systems and qualied electricians who, due to their specialised trai-
ning, skills and experience are experts in the correct installation and maintenance of C.H., cooling and air-conditioning sy-
stems.
• e appliance must be installed by qualied and professionally trained personnel.
• e instruction booklet is an integral and essential part of the product and must be given to the new user in the case of transfer or suc-
cession of ownership.
• It must be stored with care and consulted carefully, as all of the warnings provide important safety indications for installation, use and
maintenance stages.
• In compliance with the legislation in force, the systems must be designed by qualied professionals, within the dimensional limits
established by the Law. Installation and maintenance must be performed in compliance with the regulations in force, according to the
manufacturer's instructions and by professionally qualied sta, meaning sta with specic technical skills in the plant sector, as pro-
vided for by Law.
• Improper installation or assembly of the Immergas device and/or components, accessories, kits and devices can cause unexpected
problems for people, animals and objects. Read the instructions provided with the product carefully to ensure proper installation.
• is instructions manual provides technical information for installing Immergas products. As for the other issues related to the instal-
lation of products (e.g. safety at the workplace, environmental protection, accident prevention), it is necessary to comply with the pro-
visions of the standards in force and the principles of good practice.
• All Immergas products are protected with suitable transport packaging.
• e material must be stored in a dry place protected from the weather.
• Damaged products must not be installed.
• Maintenance must be carried out by skilled technical sta. For example, the Authorised Service Centre that represents a guarantee of
qualications and professionalism.
• e appliance must only be destined for the use for which it has been expressly declared. Any other use will be considered improper and
therefore potentially dangerous.
• If errors occur during installation, operation and maintenance, due to non-compliance with technical laws in force, standards or in-
structions contained in this booklet (or however supplied by the manufacturer), the manufacturer is excluded from any contractual
and extra-contractual liability for any damages and the device warranty is invalidated.
• In the event of malfunctions, faults or incorrect operation, turn the appliance o and contact an authorised company (e.g. the Authori-
sed Technical Assistance Centre, which has specically trained sta and original spare parts). Do not attempt to modify or repair the
appliance alone.