Safety Tips and Warnings
Disclaimers
The following description is the correct application method of the device.Please read
the manual carefully before use, in order to prevent danger and property loss. Strictly
conform to the manual during application and keep it properly after reading.
Caution
• Please don’t place and install the device in an area exposed to direct sunlight or near
heat generating device.
• Please don’t install the device in a humid, dusty or fuliginous area. Please keep its
horizontal installation, or install it at stable places, and prevent it from falling.
• Please don’t drip or splash liquids onto the device; don’t put on the device anything
lled with liquids, in order to prevent liquids from owing into the device.
• Please install the device at well-ventilated places; don’t block its ventilation opening.
• Use the device only within rated input and output range.
• Please don’t dismantle the device arbitrarily.
• Please transport, use and store the device within allowed humidity and temperature
range.
• Products with category I structure shall be connected to grid power output socket,
which is equipped with protective grounding.
• This doorbell includes an Auto Mechanical IR Cut Filter. When the camera changes
between Day/Night viewing modes, an audible clicking noise may be heard from
the doorbell. This clicking is normal, and
indicates that the camera lter
is working.
To Next Page
Loading...
