Step 2 (Optional) Install Wall Anchors
If installing on stucco, brick, or concrete, use the provided drill bit to drill holes where
marked, and then insert the included wall anchors.
For wood, drywall or soft surface, skip this step.
Step 3 Secure the Bracket
Secure the bracket to the mounting surface with a Philips-head screwdriver and supplied mounting screws. Be
sure to follow the "UP" direction on the mounting bracket. If you use an angled bracket, it must be used together
with the mounting bracket.
6
Angled
Bracket
OR
x 4 x 2
Mounting
Bracket
Mounting
Bracket
x 4
1 2
To Next Page
Loading...