8
Before getting started, turn o the power at the breaker, and make sure
that no power is going to your doorbell system.
i
Install the Video Doorbell (Wire Powered)
Step 1 Mark Mounting Holes
Place the mounting bracket to t your existing doorbell wiring and then use it
to mark the screw holes. Be sure to follow the "UP" direction.
OR
15° Left
5° Up 5° Down
15° Right
How to use angled bracket
Attach one of the angled mounting wedges to the mounting bracket if you
want to adjust the angle of your doorbell for a better view. Mark the screw
position according to the oval hole.
To Next Page
Loading...
