imovr ZipDesk - Assembly Step 1: Prepare the Desk

2
BEFORE YOU BEGIN
PLACE TABLETOP UPSIDEDOWN ON A SOFT SURFACE
Congratulations on your purchase of the
new ZipDesk! We hope you enjoy the health
and productivity benets that come from
using your new active workstation. The
ZipDesk is designed for quick assembly so
you can get standing in a matter of minutes.
STEP 1
CLAMP (x4)
HAND CONTROLLER
POWER SUPPLY CABLE
LEG MOTOR
CONNECTOR CABLE
FOOT (x2)
LEVELING PAD x4
ALLEN KEY
LEG (x2)
MACHINE SCREWS
M61.0×25MM
x8
STOPPER (x4)
BLUETOOTH DONGLE
LEG MOTOR
CABLE (x2)
CABLE MANAGEMENT
CLIPS x4
POWER CONTROL
BOX
WARNING
Some desk components are quite
heavy. Exercise caution when lifting
and moving the base or desk. Use
assistance when needed.