What to do if imovr ZipDesk Indoor Furnishing legs stop moving unexpectedly?
If the legs of your imovr Indoor Furnishing stop moving unexpectedly, you should adjust the anti-collision sensitivity.
What to do if imovr ZipDesk legs only move down?
If the legs of your imovr Indoor Furnishing only move downwards, it's likely that the desk has lost its height index. You should re-initialize your desk.
What does error code HOT mean on imovr ZipDesk?
Error code HOT on your imovr Indoor Furnishing indicates that the desk is overheated. Unplug and then re-plug the desk into the main power supply, and then re-initialize.
What to do if imovr ZipDesk table slides down on its own?
If your imovr Indoor Furnishing table slides down on its own, ensure that the centered weight load on the tabletop does not exceed 265 lbs.
What does error code E04 mean on imovr Indoor Furnishing?
Error code E04 on your imovr Indoor Furnishing indicates a hand controller connection error. Check the hand controller cable.
Why do imovr ZipDesk legs rise slowly?
The legs of your imovr Indoor Furnishing might be rising slowly if the legs are not perpendicular (at 90 degrees) to the desktop and the floor. If the legs are splayed inward or outward, the motor will not operate optimally. Also, check that the weight load on the tabletop does not exceed 265 lbs.
What does error code E18 or E28 mean on imovr ZipDesk Indoor Furnishing?
Error code E18 or E28 on your imovr Indoor Furnishing indicates that the leg motors are overloaded. Reduce the load on the desk.
What does error code E11 or E21 mean on imovr ZipDesk Indoor Furnishing?
Error code E11 or E21 on your imovr Indoor Furnishing indicates that a leg motor is not connected. Check the cables to ensure they are properly connected.
What does error code E08 mean on imovr ZipDesk?
Error code E08 on your imovr Indoor Furnishing means the desktop tilted while running. You should re-initialize the desk.
What to do if imovr ZipDesk Indoor Furnishing legs do not move?
If the legs of your imovr Indoor Furnishing do not move, verify the desk is plugged into the main power supply, check all connections between leg motor cables and the power control box, and ensure that the hand controller is not locked.
Instructions on sliding and locking frame clamps to secure the desk legs in place.
Details on attaching stoppers to the frame to ensure the clamps are securely locked.
Guide on plugging leg motor cables into the power control box and connecting the power supply cable.
Steps to initialize the desk, including plugging in power and holding controller buttons.
Guide on adjusting leveling pads to ensure the desk is perfectly level and stable on uneven floors.
Press and hold the up or down button to adjust your desk to your preferred height.
Instructions on saving up to three preferred height positions for quick transitions.
Provides solutions for common issues encountered with the desk's operation and error codes.
General| Brand | imovr |
|---|---|
| Model | ZipDesk |
| Category | Indoor Furnishing |
| Language | English |
To Next Page