13
ENGLISHESPAÑOLFRANÇAIS
perature in another location of the room and sends information to the unit every 3 minutes.
9) LED DISPLAY BUTTON**
Turns the temperature display on the unit on and o.
10) TIMER OFF BUTTON
Press this button to activate Auto-O. This feature turns o the unit at a programmed time within the next 24
hours.
Each press of the Timer-O button will increase the time setting in 30-minute increments, up to 10 hours, then
in 1 hour increments from 10 to 24 hours. To cancel the Auto-O time setting, just press the button until the time
setting is 0.
11) TIMER ON BUTTON
Press this button to activate Auto-On. This feature turns on the unit at a programmed time within the next 24
hours.
Each press of the Timer-On button will increase the time setting in 30-minute increments, up to 10 hours, then
in 1 hour increments from 10 to 24 hours. To cancel the Auto-On time setting, just press the button until the time
setting is 0.
12) SHORTCUT BUTTON
This button is one-touch preset for your favorite settings.
*Since your unit does not have the heat feature, you should bypass it on the remote controller.
**NOT AVAILABLE ON ALL UNITS
To Next Page
Loading...
