E
7.1.9. Display
Here you can change the multi-colour display to black and white, if
required.
7.1.10. Energy management
Here you can determine whether resp. after what interval the radio
should switch automatically from the operating to stand-by mode.
You can select from 5, 15 and 30 minutes.
If the radio does not switch o automatically, go to the line Switch
O, and conrm the command with Enter.
7.1.11. Sleeptimer
In this menu you can set the sleeptimer. Select a time periode after
which the radio automatically turns off.
7.1.12. Buffer
You can set the buffer space in this menu.
7.1.13. Weather
If the radio is connected to the Internet, you can also show weather
information on the radio display. This menu item allows you to select
the place for which weather information is to be shown. You can also
specify the temperature units.
Weather information is displayed in stand-by mode. The radio will
alternate the display automatically between weather data and the
current time.
7. OPERATION
To Next Page