Impex ASG-40 - Assembly Instructions; Step 1: Initial Setup; Step 2: Vertical Handrail Installation

ASSEMBLY INSTRUCTION
Step-1
A.) Unfold the Rebounding Bed
(#12).
B.) Thread six Legs (#10) onto the
Rebounding Bed.
C.) Slide one Handrail Support
(#7) onto one Leg. Skip the
next Leg and slide the other
Handrail Support onto the 3
rd
Leg.
Step 2
A.) Insert the two Vertical
Handrails (#5) into the two
Handrail Supports (#7).
B.) Secure each Vertical Handrail
with two M8 x 5/8”Allen Bolts
(#8).