Step-16 (See Diagram 16)
A.) Connect the Lat Bar (#40) to the Upper Cable (#44) with one Short Chain (#88) and two
Hooks (#89).
B.) Insert one Butterfly Handle (#10) into the pivot on the Right Butterfly (#9). Secure it with one
M8 x ¾” Allen Bolt (#90), Ø 5/8” Lock Washer (#124), Ø1 1/8” Washer (#42), and D-shaped
Washer (#29). Repeat the same procedure to install the other Butterfly Handle.
C.) Connect the Shiver Bar (#41) to Lower Cable (#45) with one Long Chain (#87) and two
Hooks. Replace Shiver Bar with Ankle Strap (#56) for various Leg exercises.
DIAGRAM 16
38
To Next Page
Loading...
