IMPRESSA XS95 - Decalcifying Procedures; Machine Decalcifying Steps; Rinsing After Decalcifying

Display text:
DE-SCALE MACHINE
 Press maintenance key
Display text:
EMPTY TRAY / GROUNDS
 Empty drip tray and coffee grounds container and reinsert
Display text:
AGENT IN TANK / PRESS STEAM

Remove water tank and empty it
 Completely dissolve contents of one blister (3 tablets) in
0.6 litre of water
 Pour solution into water tank
 Reinsert water tank
 Remove the 2-stage frothing jet or Professional Cappuccino
Frother
 Place container under frother
 Press one of the steam keys
Wait until an acoustic signal is heard
Display text:
OPEN TAP

Place container under hot water spout
 Open the hot water key
Wait until an acoustic signal is heard
 Close the hot water key
Wait until an acoustic signal is heard
Decalcifying (duration: approx. 50 minutes)
Display text:
EMPTY TRAY / GROUNDS
 Empty drip tray and coffee grounds container and reinsert
Display text:
FILL / RINSE WATER TANK
 Rinse water tank well, fill with fresh, cold tap water and reinsert
 Place container under pivoting steam spout
 Press one of the steam keys
Wait until an acoustic signal is heard
Displaytext:
OPEN TAP
 Place container under hot water spout
 Open the hot water key
Wait until an acoustic signal is heard
 Close the hot water key
Wait until an acoustic signal is heard
Display text:
EMPTY TRAY / GROUNDS
 Empty drip tray and coffee grounds container and reinsert
The machine is ready for use
Decalcifying (continuation)