Cleaning the cappuccino system
If you use milk products, you should clean the cappuccino system
daily.
Fill a container with 2.5 dl of water
Add 1 capful (max. 15 ml) of Auto-Cappuccino cleaner
Dip milk suction tube into this mixture
Position container (approx. 0.5 litre) under the Professional
Cappuccino Frother
Press the steam key
As soon as the container is empty:
Fill a container with fresh tap water
Dip milk suction tube into the container
Press the steam key
The machine is ready for use as soon as the tap water has run
through
In addition to using the cappuccino cleaning system, you should
also remove the Professional Cappuccino Frother regularly and
rinse it under running water.
Remove the Professional Cappuccino Frother
Dismantle the frother
Rinse all parts of the frother under running water
Reassemble the frother and reattach to machine
Please make sure that the aperture of the air supply
(= gray circle) is rinsed very carefully and is free of
impureness. Please don’t clean the frother with sharp tools!
Cleaning the Professional Cappuccino Frother
Notes
To Previous Page
Loading...
