12
CLEANING AND MAINTENANCE
CAUTION: Prior to cleaning your jewelry cleaner, isolate the unit by removing
the cord from the power outlet and avoid immersing the unit in water.
1) Allow 30 minutes for the steamer to cool before storing and emptying water.
2) Unscrew the water tank cap slowly a er the jewelry cleaner has cooled, allowing the water
tank to gradually release its pressure un l fully released.
WARNING: Never a empt to unscrew and re ll the jewelry steam cleaner
while s ll hot and under pressure.
3) Empty the water tank and the ultrasonic reservoir when storing the unit for a prolonged period.
4) Wipe the jewelry cleaner and accessories with a so cloth when/if necessary.
CUSTOMER SUPPORT
For problems with your Improvements Dazzle 3-in-1 Jewelry Cleaner and Sani zer, please refer to
Troubleshooting guide. Additional inquiries should be directed to our Customer Service
department by calling 1-888-574-3662 or by e-mail to: customerservice@anvidproducts.com.
Product Specs:
Voltage supply: 120V, 60 Hz
Output: 1100 W
Water tank capacity: max. 350ml / 12 oz
Cord: 3.94 .
Weight: 7.9 lbs
Protec on class: 2
To Next Page
Loading...
Need help?
General