Impulse Dynamics OPTIMIZER Smart Mini - Nominal Wireless Specifications for System Components; Vesta Charger Wireless Nominal Specifications; OPTIMIZER Smart Mini IPG Wireless Nominal Specifications

44
ETSI EN 301 839
GUIDELINES AND MANUFACTURER’S DECLARATION – ELECTROMAGNETIC
EMMISSIONS OF THE VESTA CHARGER PURSUANT TO:
ETSI EN 301 839 V2.1.1 - Ultra Low Power Active Medical Implants (ULP-AMI) and
associated Peripherals (ULP-AMI-P) operating in the frequency range 402 MHz to
405 MHz; Harmonised Standard covering the essential requirements of article 3.2
of the Directive 2014/53/EU
The Vesta Charger, part of the OPTIMIZER Smart Mini System is intended for use in an
electromagnetic environment as specified below. The customer or user of the Vesta
Charger must ensure that it is used within the specified environment.
Emissions Test Compliance Electromagnetic
environment -
guidelines
Frequency Error
Complies with clause 5.3.1
The Vesta Charger must
emit electromagnetic
energy in order to perform
its intended function.
Nearby electronic
equipment may be
affected
Occupied Bandwidth
Complies with clause 5.3.2
Power Output
Complies with clause 5.3.3
Transmitter Spurious
Emissions (30 MHz to 6
GHz)
Complies with clause 5.3.4
Frequency Stability Under
Low Voltage Conditions
Complies with clause 5.3.5
Spurious Radiation of
Receivers
Complies with clause 5.3.6