6)
Assembling the Backrest
There are three adjustment holes for the
backrest. (Left) Choose the one most com-
fortable for
you when you
sit down.
Insert the two bolts and wing
nuts provided to secure the back-
rest into place. Slide the bolt
through the top side of the tube
and secure with the wing nut
below. (Right)
7)
Mounting the Basket
With the seat flipped up
from the rear (the side held
shut by magnets), position
the basket from underneath,
with the curved side toward
the front, so that the four
connecting bolts slide up
through the mating holes in
the seat frame.
(7A)
Secure the basket using the four
washers and the wing nuts pro-
vided.
(7B)
— 5 —
7A -
Before attaching hardware
7B -
After attaching hardware (close-up)
To Next Page
