Inateck BCST-40 - How to Power On and Off; How to Connect with Other Devices; Bluetooth HID Mode

EN
1 2
1. How to Power on/o
1) To power on the barcode scanner, press the scanning button for 3 seconds and wait until
the scanner beeps twice and the indicator ashes green.
2) To power o the barcode scanner, press the scanning button for 3 seconds and wait until
the scanner beeps twice.
3) By default, the barcode scanner enters sleep mode after 3 minutes in idle status. This
time setting can be altered by scanning the corresponding barcode.
2. How to Connect with Other Device
Bluetooth HID Mode
Bluetooth HID mode is the default mode. If you want to use this mode, please scan “Enter
Setup”-”Bluetooth HID Mode”-”Save and Exit” barcode in turn.
This is a brief version of BCST-40 manual instruction. For more detailed function illustration,
please go to www.inateck.com to download the complete user manual or contact us via
support@inateck.com. We’ll try our best to solve your problem in time.
Functions Setup
(Note: the barcode “*” is the default setting of BCST-40)
Enter Setup