Need help?Do you have a question about the Inateck BCST-91 and is the answer not in the manual?
General| Operating System Compatibility | Windows, macOS, Linux, Android, iOS |
|---|---|
| Power Supply | Rechargeable battery |
| Battery Capacity | 2600mAh |
| Scanning Technology | Laser |
| Connectivity | Bluetooth, USB |
| Bluetooth Range | 10m |
| Supported Barcodes | 1D barcodes |
| Scan Mode | Manual, Continuous |
| Connection | Bluetooth |
Precautions to prevent short circuit, circuit damage, or fire hazards.
Guidelines for cleaning and storing the barcode scanner to ensure longevity.
Detailed technical specifications including model, material, battery, memory, and supported barcodes.
Explains the meaning of different LED flash patterns and colors.
Describes the sounds the scanner makes and their corresponding meanings.
Configures scanner compatibility with OS and selects keyboard layouts.
Selects from various keyboard layouts including Japanese, Canadian, and European options.
Allows saving customized settings or restoring to factory defaults.
Procedures for resetting the scanner to its original factory configuration.
Instructions to display the scanner's current software version.
Method to check the remaining battery level of the scanner.
Configuration of the interval between data transmissions for optimal efficiency.
Setting the interval for the scanner to enter sleep mode to conserve battery.
Explains how scanned barcodes are stored temporarily in memory.
Options for clearing buffer data and auto-uploading upon reconnection.
Procedures for entering inventory mode, erasing, uploading, and counting data.
Prevents scanning the same barcode multiple times by issuing a sound alert.
Settings for adjusting scanner volume and vibration feedback.
Default mode where the red light turns off automatically after inactivity.
Configures the duration the red light stays on before turning off.
Enables continuous scanning without needing to press the scan button.
Describes the default connection method using a base station and USB cable.
Instructions for pairing multiple scanners with a single USB adapter.
Steps to detach a scanner from its connected base station.
Configuration for Serial Port Profile (SPP) Bluetooth connection for data transfer.
Procedure to change the Bluetooth name of the scanner.
Explains that USB connection prioritizes data transmission over Bluetooth.
Settings for Codabar and Code 11, including enable/disable and checksum options.
Details on transmitting or not transmitting the checksum for Code 11 barcodes.
Settings for enabling/disabling Code 128, GS1-128, USPS, FedEx, and Code 39.
Configuration for Code 39 checksum, START/STOP characters, and ASCII recognition.
Settings for VIN, Code 32 (including initial character), and Code 93.
Options for EAN-8 and EAN-13, including enable/disable and checksum transmission.
Options to convert EAN-13 to ISBN/ISSN and MSI barcode settings.
Details on MSI checksum handling, including one-digit and two-digit options.
Configuration for UPC-A, including outputs, checksum, and number system digit.
Settings for UPC-E, including enable/disable UPC-E, UPC-E1, and initial digit.
Settings for IATA 2 of 5, Interleaved 2 of 5, and Matrix/Standard 2 of 5.
Settings for enabling or disabling the GS1 DataBar barcode family.
Settings for GS1 DataBar Composite and QR Code recognition.
Options for enabling/disabling Data Matrix and its recognition modes.
Details on Data Matrix recognition for normal, inverted, or both types.
Settings for enabling or disabling PDF 417 and Aztec code types.
Enables/disables Code ID and provides a list mapping barcode types to Code IDs.
Controls AIM ID output and sets end characters like Enter or Tab.
Allows setting custom prefix and suffix strings for scanned barcodes.
Steps to set prefix and suffix characters for scanned barcode output.
Function to remove specified characters from the beginning or end of scanned data.
Detailed steps and options for deleting front and end digits from barcode output.
Enables or disables recognition of 2-digit and 5-digit additional codes.
Sets recognition modes and adds a separation character between main/additional codes.
Manages the effect of the Caps Lock key on scanned barcode content.
Restricts scanning to barcodes starting with specific initial characters.
Enables/disables inverted barcode recognition and hides special initial characters.
Details on hiding specific initial characters for Code 128 and Code 39.
Enables outputting time and/or date stamps with scanned barcodes.
Options to set the day, hour, minute, and second for the time stamp.
Configures the data coding format (Original, GBK, UNICODE) for Chinese characters.
Replaces the GS separation character with a custom character.
To Next Page
