Inateck BCST-91 - Barcode Type Settings: Code 11 Checksum; Code 11 Checksum Transmission

Enter Setup
Exit and Save
22
11 with 1-digit checksum.
After you set the "Transmit Code 11 Checksum" function, the scanner will take the last 1 or 2
digit(s) of the regular data as the checksum to transmit. The scanner defaults the "Code 11
Transmit Checksum" setting.
Scan the "Do not Transmit Code 11 Checksum" barcode and the scanner won't transmit the
checksum.
(*) Code 11 without Checksum
Code 11 with 1-digit Checksum
Code 11 with 2-digit Checksum
(*) Transmit Code 11 Checksum
Do not Transmit Code 11 Checksum