Need help?Do you have a question about the Inateck BCST-50 and is the answer not in the manual?
General| Brand | Inateck |
|---|---|
| Model | BCST-50 |
| Category | Barcode Reader |
| Language | English |
Resets the scanner to factory default settings via a 1D barcode.
Resets the scanner to factory default settings via a 2D barcode.
Activates inventory mode for batch barcode scanning and uploading.
Uploads scanned data from the buffer in inventory mode.
Retrieves the total number of barcodes scanned in inventory mode.
Clears all stored data from the buffer while in inventory mode.
Exits inventory mode and resumes normal operation.
Configures Bluetooth to operate in Human Interface Device mode.
Configures Bluetooth to operate in Serial Port Profile mode.
Configures a 0.5-second interval to prevent duplicate barcode reads.
Configures an 8-second interval to prevent duplicate barcode reads.
Configures the scanner to read 1D barcodes with inverted colors.
Configures the scanner to read all types of 1D barcodes.
Configures the scanner to read all types of 2D barcodes.
Manages UPC-A barcode reading, including number system and country code.
Manages the output of the UPC-A barcode check digit.
Configures additional codes (2 or 5 digits) for UPC-A.
Manages UPC-E barcode reading, including number system and country code.
Manages the output of the UPC-E barcode check digit.
Configures additional codes (2 or 5 digits) for UPC-E.
Enables conversion of UPC-E barcodes to UPC-A format.
Enables conversion of UPC-A barcodes to EAN-13 format.
Manages settings for UPC-E1 barcode reading.
Manages EAN-8 barcode reading, including check digit and additional codes.
Manages the output of the EAN-8 barcode check digit.
Configures additional codes (2 or 5 digits) for EAN-8.
Manages EAN-13 barcode reading, including check digit, ISBN, and ISSN.
Manages the output of the EAN-13 barcode check digit.
Configures the scanner to read ISBN (International Standard Book Number).
Configures the scanner to read ISSN (International Standard Serial Number).
Configures additional codes (2 or 5 digits) for EAN-13.
Configures the scanner to read CODE 128 barcodes.
Configures the scanner to read GS1-128 barcodes.
Manages Interleaved 2 of 5 barcode reading, including length and check digits.
Manages Matrix 2 of 5 barcode reading, including length and check digits.
Manages Industrial 2 of 5 barcode reading, including length and check digits.
Manages Standard 2 of 5 barcode reading, including length and check digits.
Manages Code 39 barcode reading, including length, check digits, and start/stop characters.
Configures the scanner to read Code 39 barcodes using Full ASCII.
Manages Code 32 barcode reading, including check digit and prefix.
Manages Code 93 barcode reading, including length and check digits.
Manages Code 11 barcode reading, including length and check digits.
Manages Codabar barcode reading, including length, start/stop characters, and format.
Manages MSI barcode reading, including length.
Configures the scanner to read GS1-Databar barcodes.
Configures the scanner to read GS1 composite codes.
Manages QR code reading, including twin codes and inverse decoding.
Manages Data Matrix barcode reading, including twin codes and inverse decoding.
Manages PDF417 barcode reading, including twin codes and inverse decoding.
Configures the scanner to read Aztec codes.
Configures the scanner to read Maxi codes.
Configures the scanner to read Hanxin codes.
To Next Page
