Inateck BCST-50 - Matrix 2 of 5 Settings

12
7.10 Matrix 2 of 5
7.10.1 Scan the two-dimensional codes below to read/not to read Matrix 2 of 5
7.10.2 Only decode Matrix 2 of 5 of a certain length range
Users can set to decode Matrix 2 of 5 of a certain length range.
For example, to decode Matrix 2 of 5 of the range of 4 - 20 digits:
Scan the barcode below, and then scan “0”, "4", "2", "0" in Appendix 1.
If the barcode of a certain length range cannot be read, please read the barcode
"Matrix 2 of 5 of any length". Please contact us if the problem still occurs.
7.10.3 Verify Matrix 2 of 5 Check Digits
7.10.4 Output Matrix 2 of 5 Check Digits
Enable
Enable
Enable
Matrix 2 of 5 of a certain length range
（*）Disable
（*）Disable
（*）Disable
Matrix 2 of 5 of any length