Need help?Do you have a question about the Inateck BCST-52 and is the answer not in the manual?
General| Brand | Inateck |
|---|---|
| Model | BCST-52 |
| Category | Barcode Reader |
| Language | English |
Contact details for Inateck in the United States.
Contact details for Inateck in Germany.
Contact details for Inateck in Japan.
Controls the red aiming light for targeting barcodes during scanning.
Controls the white light for illumination in low-light scanning conditions.
Details charging the scanner via the base or USB cable.
Describes the base as a charger, receiver, and stand for the scanner.
Instructions for applying and reusing the adhesive sticker for the base.
Connects the scanner to a computer via USB cable for data transfer.
Connects the scanner wirelessly using the base dongle.
Enables or disables the virtual keyboard on iOS devices.
Activates/hides iOS keyboard via double-click on the scan button.
Activate mode to store barcodes in memory for batch uploads.
Remove characters from the start of scanned data.
Remove characters from the end of scanned data.
Meanings of different buzzer sounds for status alerts.
Status lights on the barcode scanner itself.
Status lights on the scanner base.
To Next Page
