Inateck BCST-50 - Interleaved 2 of 5 Settings

11
7.9 Interleaved 2 of 5
7.9.1 Scan the two-dimensional codes below to read/not to read Interleaved 2 of 5.
7.9.2 Only decode Interleaved 2 of 5 of a certain length range.
Users can set to decode Interleaved 2 of 5 of a certain length range.
For example, to decode Interleaved 2 of 5 of the range of 4 - 20 digits:
Scan the barcode below, and then scan “0”, "4", "2", "0" in Appendix 1.
If the barcode of a certain length range cannot be read, please read the barcode
"Interleaved 2 of 5 of any length". Please contact us if the problem still occurs.
7.9.3 Verify Interleaved 2 of 5 Check Digits
7.9.4 Output Interleaved 2 of 5 Check Digits
（*）Enable
（*）Enable
（*）Enable
（*）Interleaved 2 of 5 of a certain length
range
Disable
Disable
Disable
Interleaved 2 of 5 of any length