Inateck BCST-91 - Connectivity Options; Set Bluetooth Name; Wired USB Mode Priority

Enter Setup
Exit and Save
20
Set Bluetooth Name
The BCST-91 features Bluetooth name setting with length limited to 32 characters. To change
the Bluetooth name, please first make sure the BCST-91 is under Bluetooth HID or GATT
mode and then scan the "Enter Setup" - "Set Bluetooth Name" - "Bluetooth Name" (Scan the
corresponding character barcodes in the appendix) - "Exit and Save" barcodes.
Note: Please cut the scanner from wireless Bluetooth connection with your phone or
computer and delete the pairing history on your phone and computer after modifying the
Bluetooth name. Reconnect the scanner with your phone or computer via wireless Bluetooth
connection again to reveal the new Bluetooth name.
For example, to change the Bluetooth name to "Tom", you may follow the steps below:
1. Scan the "Enter Setup" barcode.
2. Scan the "Set Bluetooth Name" barcode.
3. Scan the "T" character barcode in the Appendix I.
4. Scan the "o" character barcode in the Appendix I.
5. Scan the "m" character barcode in the Appendix I.
6. Scan the "Exit and Save" barcode.
Set Bluetooth Name
Wired USB Mode
If you have connected the BCST-91 with your computer via the USB cable, the BCST-91 will
prioritize using the USB data transmission mode.