Inateck BCST-91 - Data Formatting Options; AIM ID and End Character Settings; Custom Prefix;Suffix Setting

Enter Setup
Exit and Save
36
Aztec Code
C
Maxi Code
D
Data Matrix
E
Han Xin Code
F
GS1 128
G
GS1 DataBar, GS1 DataBar Expanded, GS1 DataBar Limited
H
AIM ID
You can decide whether or not to include the barcode AIM ID before the output barcode
information, the default is not to output the AIM ID.
Output Code ID
(*) Do not Output Code ID
Code End Character Setting
You may decide whether to add a "Enter" after a barcode output. The scanner defaults adding
an "Enter" after a barcode.
(*) Add "Enter" after Barcode
Add "Tab" after Barcode
Do not Add "Enter" and”Tab” after Barcode
Custom Code Prefix/Suffix Setting
The BCST-91 supports customizing 1-32 digit(s) of barcode prefix, and 1-32 digit(s) of barcode
suffix. The prefix and suffix can be either shown or hidden. The scanner defaults showing the