Inateck BCST-91 - Data Coding and Character Replacement; Data Coding Format Settings; GS Replacement Character Setting

Enter Setup
Exit and Save
46
Settings of Data Coding Format
To let the host print Chinese data in given code format, you may complete the setting by
reading the "Data Coding Format" barcode. The scanner defaults outputting data in GBK
coding format.
1. Original Data Format, the data coding output format is closely connected with the code
generation environment. The output format can be GBK or UNICODE.
2. The GBK (GB2312) is applicable to software like Notepad, Excel, etc.
3. The UNICODE is applicable to software like WORD etc.
(*) Original Data Coding Format
GBK Data Coding Format
Unicode Data Coding Format
(*) Disable Original and GBK Chinese
Character Recognition
Enable Original and GBK Chinese Character Recognition
Replace GS (^]) with Specific Character
The BCST-91 supports replacing the GS separation character (^]) with specific characters. The
scanner defaults disabling the function.
Steps to set replacing GS separation character with character "A" are as below:
1. Read the "Enter Setup" barcode.
2. Read the "Set the GS Replacement Character" barcode.
3. Read the "A" barcode in Appendix I.
4. Read the "Exit and Save" barcode.