Enter Setup
Exit and Save
Additional Code
Barcodes like EAN-8, EAN-13, ISBN, ISSN, UPC-A and UPC-E can have additional codes. These
additional codes appear on the right of the main code and are shorter than the main code,
which can be 2-5 digits. The BCST-91 will only read the main code after you disable the
additional code.
You may decide whether to recognize the 2-digit additional code by set this function that is
applicable to EAB-8, EAN-13, ISBN, ISSN, UPC-A, and UPC-E. The BCST-91 defaults disabling
the recognition of 2-digit additional code.
Enable 2-Digit Additional Code
(*) Disable 2-Digit Additional Code
You may decide whether to recognize the 5-digit additional code by setting this function
which is applicable to EAN-8, EAN-13, ISBN, ISSN, UPC-A and UPC-E. The scanner defaults
disabling the recognition of 5-digit additional code.
Enable 5-digit Additional Code
(*) Disable 5-digit Additional Code
To Next Page
Loading...
