Inateck BCST-91 - Barcode Type Settings: ISBN;ISSN and MSI; ISBN;ISSN Conversion and MSI Settings

Enter Setup
Exit and Save
27
ISBN
Convert EAN-13 into ISBN
You may decide whether to convert EAN-13 into ISBN. The scanner won't convert EAN-13
into ISBN by default.
Convert EAN-13 into ISBN
(*) Do not Convert EAN-13 into ISBN
Convert EAN-13 into ISSN
You may decide whether to convert EAN-13 into ISSN. The scanner disables the conversion
by default.
Convert EAN-13 into ISSN
(*) Do not Convert EAN-13 into ISSN
MSI
Enable/Disable MSI
Enable MSI
(*) Disable MSI
Checksum Code
The MSI barcode contains 1-digit compulsory checksum code. If there is a checksum code, it
will be the last 1 or 2 digit(s). The checksum is the value added from all data collected to check
if the data input is correct.
After you set the "MSI without Checksum" function, the scanner can recognize all regular MSI
barcodes. The default setting is "MSI without checksum".
After you set the "MSI with One-digit Checksum" function, the scanner will take the last digit
of the data as the checksum and won't be able to recognize MSI without checksum or with
2-digit checksum. The default setting is "MSI with One-digit Checksum".