Inateck BCST-91 - Time Stamp Functionality; Hiding Special Initial Characters; Enabling Time Stamp Output

Enter Setup
Exit and Save
43
parameter of a product. For example, the character "p" as initial character can indicate "Part
Number", and character "Q" can indicate quantity. The BCST-91 can hide such initial
characters. If the initial characters are set to be hidden, the initial characters for code 128 and
code 39 including D, K, P, Q, S, V, 1P, 1T, 10D, 17V, 2P or 4L will be hidden and won't output.
"Hide Special Initial Character" function is disabled by default.
Hide Special Initial Character
(*) Show Special Initial Character
Time Stamp Function
The time stamp includes time (hour/minute/second) and date (day/month/year). The BCST-
91 disables time stamp function by default. You may decide whether to output it. You can
enable either the time or date, or both time and date output. After you set the time output
function, the time stamp will be added to the output of each barcode in the format of 24-
hour time system.
Output Time
(*) Do not Output Time
Output Date
(*) Do not Output Date
Due to the time zone difference or the shortage of battery, you may encounter problems
such as the time stamp does not synchronize with the local time. You can scan the barcodes
below to set the time stamp.
Set the Year of Time Stamp
Set the Month of Time Stamp