Inateck BCST-91 - Barcode Type Settings: UPC-E; UPC-E Settings

Enter Setup
Exit and Save
30
UPC-E
Enable/Disable UPC-E
(*) Enable UPC-E
Disable UPC-E
Enable/Disable UPC-E1
The initial digit of most UPC-E is "0". If you want to read UPC-E barcodes with initial digit "1",
please first enable the UPC-E and then set the "Enable UPC-E1" barcode. The scanner defaults
disabling the UPC-E1.
Enable UPC-E1
(*) Disable UPC-E1
Enable/Disable Initial Digit of UPC-E
(*) Enable Initial Digit of UPC-E
Disable Initial Digit of UPC-E
Convert UPC-E to UPC-A
Convert UPC-E to UPC-A
(*) Do not Convert UPC-E to UPC-A
Checksum Code
(*) Transmit UPC-E Checksum
Do not Transmit UPC-E Checksum