Inateck BCST-91 - Character Deletion Configuration; Character Deletion Steps and Options

Enter Setup
Exit and Save
38
5. Scan the "Set the Number of End Digit(s) to be Deleted".
6. Scan the "4 Digits" barcode.
7. Scan the "Exit and Save" barcode.
Set Number of Front Digit(s) to be Deleted
Set Number of End Digit(s) to be Deleted
(*) 0 Digit
1 Digit
2 Digits
3 Digits
4 Digits
5 Digits
6 Digits
7 Digits
8 Digits
9 Digits