Inateck P6 User Guide

UseofInateckP6
Startup
Note:
1)InateckP6willstartsleepmodeifthereisnooperationonitover
3minutes.Shortpressonthetriggercanwakeitup.
2)WhenthedistancebetweenInateckP6anditsadapterexceeds
the effective range, scanned data will be kept in the buffer of
InateckP6.Quicklydoublepressonthetriggercanuploaddata
frombuffer.
WirelessMode:
1.Insertthe2.4GUSBadapterintotheUSBportofcomputer.The
initializationiscompletedifblueLEDontheadapterblinksonce.
2.PoweronInateckP6bytogglingswitchfromOFFtoON.Short
pressthetriggertoemitredlaserbeamandscanbarcodes.
3.Open af
ile oncomputerandmovecursor tothe blankwhere
scanning output should be placed. Scanning results can be
displayedoncomputerthen.
WiredMode:
1.ConnectInateckP6withcomputerviaUSBcable
2.PoweronInateckP6bytogglingswitchfromOFFtoONandshort
pressthetrigger.InateckP6willcontinuouslybeep.Beepstops
aftersuccessfulconnection.
3.Open af
ile oncomputerandmovecursor tothe blankwhere
scanning output should be placed. Scanning results can be
displayedoncomputerthen.
FunctionSetup
(Note:Thebarcodemarkedby“*”meansdefaultsettingofInateckP6.)
Users must read setup barcodes in order to change the default
settingsinInateckP6BarcodeScanner.
Statusindication
BuzzerIndication
LEDIndication
FrequentlyUsedBarcodes
SettingforKeyboardLanguage
1.ReadʼEntersetupʼBarcode
2.SelectandScanyourkeyboardlanguageBarcode
3.Scan“ExitwithSave”Barcodetoendlanguagesetting
Note: The keyboard language of Inateck P6 should keep
consistent with that on computer, otherwise, garbled might
appearinscanningresult.
SettingforPrefix/Suffix
Userscanaddprefix/suffixtoscanningresult.Theprefix/suffixcan
have1to8digits.Moredetailsareasbelow.
1.Scan“Entersetupʼ”Barcode
2.Scan“Pref
ixSetting”or“SuffixSetting”
3. Scan the character barcode (8 characters at the most). For
instance, “H#” is the pref
ix/suffix to be added to the scanning
result,scanthecharacterbarcodeof“H”and“#”below.
4.Scan“ExitwithSave”Barcodetoendthesetting
UserGuide
P6BarcodeScanner
1 2 3
4 5 6 7
8 9 10 11
12 13 14 15
16 17 18 19
20 21 22 23
24 25 26 27
28 29 30 31

Inateck P6 Specifications

General

Scanning Technology	Laser
Battery Capacity	1000mAh
Connectivity	USB
Supported Barcodes/Symbologies	UPC, EAN, Code 39, Code 128
Operating System Compatibility	Windows, macOS
Weight	150g
Scanning Distance	Up to 30 cm