Need help?Do you have a question about the Inateck P7 and is the answer not in the manual?
General| Barcode Type | 1D |
|---|---|
| Weight | 150g |
| Connectivity | Bluetooth |
| Scanning Speed | 300 scans/sec |
| Supported Barcodes | Code 39, Code 128 |
| Operating System Compatibility | Windows, macOS, Android, iOS |
| Bluetooth Range | 10m |
| Interface | USB |
| Compatibility | Windows, macOS, iOS, Android |
Guidelines for safe usage of the barcode scanner, preventing damage or hazards.
Instructions for cleaning and maintaining the barcode scanner to ensure longevity and proper function.
Procedure to access the scanner's configuration menu using setup barcodes.
Steps to save customized scanner configurations using specific barcodes.
Procedure to exit setting mode without saving changes, responding with three chord sounds.
Instructions to scan barcodes to retrieve and display the scanner's software version.
Settings to adjust the volume of the beeper, including mute, minimum, medium, and maximum levels.
Options to enable/disable vibration feedback and adjust its strength (weak/strong).
Scanner mode where the red light turns off after a set waiting time if no barcode is scanned.
Scanner remains active, scanning barcodes automatically without trigger press.
Requires trigger press to activate scanning; stops when barcode is read or trigger released.
Red light stays on after scanning, preventing repeat scans; no trigger press needed.
Selection of various international keyboard layouts including US, German, French, Spanish, Italian, UK, Japanese, and Canadian.
Connects the scanner via Bluetooth HID profile, enabling keyboard emulation.
Connects the scanner via Bluetooth SPP, enabling serial communication.
Allows setting custom prefixes and suffixes (up to 32 digits) for barcode output.
Sets the number of characters to delete from the start and end of barcode output.
To Next Page
