Inateck P7 - Interleaved 2 of 5; Enable; Disable Interleaved 25; Matrix 2 of 5; Enable;Disable Matrix 25

54
Verify IATA 25 without Output Checksum Character
3.12 Interleaved 2 of 5
3.12.1 Enable / Disable Interleaved 25
Decide whether to enable Interleaved 25 by scanning correspondent barcode below. Inateck P7
defaults to “Enable Interleaved 25”.
（*）Enable Interleaved 25
Disable Interleaved 25
Operations are as below if you want to enable Interleaved 25:
1. Read the "Enter Setup" barcode;
2. Read the "Enable Interleaved 25." barcode;
3. Read the "Exit with Save" barcode.
Enter setup
Exit with save
Exit without save
3.13 Matrix 2 of 5
3.13.1 Enable /Disable Matrix 25
Decide whether to enable Matrix 25 by scanning correspondent barcode below. Inateck P7
defaults to “Disable Matrix 25”.