Inateck P7 - 4.9 Caps Lock Control

70
Enter setup
Exit with save
Exit without save
4.9 Caps Lock Control
When you operate Inateck P7 on a Windows system, the barcode output might change with the
status of the key Caps Lock. To avoid mistakes caused this way, you can activate the “Rid Barcode
of Caps Lock control”.
（*）Caps Lock Control
Rid Barcode of Caps Lock Control
How to activate “Rid Barcode of Caps Lock Control ”
1) Scan “Enter Setup”;
2) Scan “Rid Barcode of Caps Lock Control”
3) Scan “Save and Exit”.
Enter setup
Exit with save
Exit without save